Commercial and light industrial electrical work runs on a different clock than a home repair call. A business that needs a circuit replaced, a panel assessed before a tenant moves in, or a lighting upgrade across a workspace cannot always wait until Monday morning, and the job itself has different demands. Multiple circuits, load calculations across the whole space, and the need to keep certain areas live while others are de-energized are all part of how we scope commercial work before we schedule it. We cover that kind of job throughout Hollins, and we are available every day from 6 AM to 9 PM.
Residential calls in a town this size tend to come from homes that have been through a few decades of changes, some planned and some improvised. Older housing stock, outbuildings added over the years, circuits that were extended without documentation, and panels that have been holding on longer than they should are all part of what we find when we show up. We handle both ends of that range, from a single outlet that has stopped working to a full-panel replacement or whole-home rewire.
Call (540) 324-2664 to get a quote and find out what the job involves before anything is scheduled.
Previous electrical work varies widely in quality. Some of it is close to correct and needs only a small adjustment to bring it up to standard. A connection that was made with the wrong wire gauge, a junction box that was buried without a cover, a circuit that was added without arc-fault protection where the current code requires it - these are fixable without pulling the whole circuit. We assess what we are looking at, explain what the problem is, and tell you what correcting it involves before we do anything.
When a repair opens up a wall or a ceiling and reveals wiring that was not part of the original call, we do not work around it and say nothing. We show you what we found and give you a clear picture of whether it needs immediate attention or whether it is something to plan for. That conversation happens before any additional work is priced or scheduled.
Some previous work cannot be corrected in place. Wiring that was run without a ground, connections made with tape instead of proper connectors, or a circuit that was added to a panel that was already at capacity - these are situations where the repair is the wiring itself, not just the device at the end of it. We tell you which category you are dealing with on the same visit, and we give you the scope and the price before we proceed. The work is done to the standard the next inspection expects, whether that inspection happens tomorrow or years from now.
Electrical pricing comes from three things: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change. A tripped breaker that stays tripped is a different job from a breaker that trips because the circuit is overloaded and needs to be split. An outlet that needs replacing is a different job from an outlet that has gone dead because of a fault upstream. We do not quote a number until we understand which situation we are dealing with.
When you call, we ask about the symptom and the location, and we tell you what the visit covers and what it is likely to cost before we schedule anything. If the job opens up into something larger, we explain what we found and confirm the price before we go further. You get a straight answer on the call, not a range that leaves you guessing.
Homes in this area were wired in different decades, and it shows in the panels. An older property may have a panel brand that has been discontinued, breakers that are no longer in standard production, or a box configuration that does not accept modern breaker styles directly. When we assess a panel or a circuit in an older home, we identify what is there before we quote the job, because the parts question affects both the cost and the timeline.
Where a direct replacement exists, we use it. Where the original part is obsolete, we explain what the compatible option is and why it works. We do not substitute parts without telling you what we are using and why.
Some components are not available same-day, particularly for older or less common panel brands. When that is the case, we tell you on the call rather than showing up and discovering it at the property. If the job can be safely staged, with the diagnostic and any preparatory work done on the first visit and the replacement completed when the part arrives, we set that up and confirm the timeline with you. If the situation is urgent and a delay is not safe, we tell you that too and work out the right path forward.
A panel that is running out of capacity, a breaker that will not hold, or a box that is simply too old to be reliable are the situations that lead to this call. Panel replacement involves pulling the old equipment, installing a properly sized unit, landing every circuit correctly, and labeling every breaker before we close it up. A load calculation is part of the job, not an add-on, because the new panel has to be sized for what the home or building actually draws. Arc-fault and ground-fault breakers go in where the circuit calls for them.
A dead outlet is not always a failed outlet. GFCI protection upstream can trip and take several outlets with it, and finding the source is part of the job. When a replacement is the right answer, we match the outlet type to the location: GFCI in wet areas, AFCI where the circuit requires it, standard where neither applies. Switch replacements follow the same logic. If a dimmer is buzzing or a three-way switch has stopped working correctly, the fix depends on what is behind the wall, and we confirm that before quoting.
An outdoor outlet that is not properly protected is a hazard in any season. We install weatherproof outlets and in-use covers for exterior locations, run the wiring from a protected indoor circuit, and make sure the GFCI protection for the outdoor run is correctly placed. Exterior lighting circuits and outlet circuits for garages, sheds, and outbuildings fall into this category too. We assess where the circuit needs to originate and what the panel can support before we run anything.
Homes built in certain decades were wired with aluminum branch-circuit wiring, and that wiring behaves differently from copper at the connection points. Connections loosen over time as the metal expands and contracts with heat, which creates resistance and, eventually, a fire risk. Remediation involves going through every connection in the affected circuits, installing the correct connectors or replacing the terminations with devices rated for aluminum wiring, and verifying that the work is solid before we leave. We assess the extent of the aluminum wiring on the initial visit and give you a scope that reflects what is actually there.
A dryer, an electric range, a refrigerator in a garage, or a sump pump that runs on a shared circuit is a circuit that is being asked to do more than it was designed for. Dedicated circuits are sized for the specific load, run with the correct wire gauge, protected by the right breaker, and landed at the right outlet type for the appliance. If the panel does not have the capacity to add the circuit without overloading it, we tell you that before we run anything, and we scope the panel work alongside the circuit if that is what the job requires. Before booking anything, the full electrical services list is worth a read.
When you call to schedule, we ask about the situation, confirm what the visit covers, and give you a price before anything is booked. We work around the schedules that matter: a business that cannot have its main space de-energized during business hours, a tenant who needs to be home for the visit, a property manager coordinating access across multiple units. We set the appointment around what works and confirm it before we show up.
When a problem will not keep, the same number reaches us. We are available every day from 6 AM to 9 PM, and urgent calls are handled within those hours. We answer the phone. We show up ready to work. We test before we leave. If the situation is one where waiting is not safe, tell us that on the call and we will work out what the schedule allows.
We cover Hollins and the communities around it. Cloverdale, Laymantown, Daleville, Vinton, and the broader Roanoke area are all part of the territory we work.
Residential and commercial calls from any of these areas reach us the same way: call (540) 324-2664, tell us what you are dealing with, and we will scope the job and confirm the price before anything is scheduled.
We take reasonable care to protect the work area, and for jobs that involve cutting into walls or ceilings, we confirm what the cleanup expectation is before we start. If you have specific concerns about a surface or a piece of furniture near the work area, mention it on the call and we will plan around it.
We work around the parts of the building that need to stay live. Before the visit, we confirm which circuits will need to be de-energized and for how long, so you can plan around it. The goal is to get the work done without shutting down operations any longer than the job requires, and we talk through that on the call before we book anything.
We can schedule work during a vacancy window when the dates are confirmed in advance.
Call us at (540) 324-2664 with the available dates and the scope of what needs doing, and we will tell you what is realistic to complete in that window.
Yes. We can assess work done by others, confirm its condition, and take over from where it was left. If there are problems with the existing work, we explain what they are and what correcting them involves before we proceed. We do not assume previous work is correct without checking it.
Pumps, filters, and lighting for pools and ponds require dedicated circuits with the correct grounding and bonding to meet safety requirements. Outdoor outlets near water also need GFCI protection at the right rating for the application. We confirm what the equipment draws and what protection the installation requires before the work is scoped.
A buzzing sound from the panel can indicate a breaker that is failing to hold its connection, a loose wire landing, or a circuit that is running at or beyond its rated load. It is worth having looked at promptly rather than waiting to see whether it gets worse. We test the panel and identify the source before any repair is quoted.
It depends on what the old appliance drew and what the new one requires. If a new dryer or range pulls more current than the existing circuit was sized for, the circuit needs to be updated before the appliance is connected. We confirm the appliance specs on the call and tell you whether the existing circuit is adequate or whether a new one is part of the job.
Yes. Detached garages, sheds, and outbuildings often need their own subpanel or a dedicated circuit run from the main house panel, depending on the load and the distance. We assess what the structure needs and what the main panel can support before we quote the work. The scope and the price are confirmed before anything is scheduled.
Homes built in certain decades in this region were wired with aluminum branch-circuit wiring, and it is not uncommon to find it in older properties here. Remediation means going through every connection in the affected circuits and either replacing the terminations with devices rated for aluminum wiring or installing the correct connectors at each point. We assess the extent of the aluminum wiring on the first visit and give you a scope that reflects what is actually in the home.
When you call about electrical work in Hollins, we will ask about the symptom, the location, and what the property looks like. By the time we hang up, you will know what the visit covers, what we expect to find, and what the job is likely to cost.
Call Roanoke Electrical Company at (540) 324-2664 and we will take it from there. One call gets the problem looked at properly.
Also serving: Cloverdale, Daleville, Vinton, Salem. For every town we reach, see our town-by-town list.
Every electrical job we handle starts the same way: a call, a clear scope, and a price confirmed before anything is scheduled. The table below covers the full range of work we do across Hollins and the surrounding area, from a single outlet replacement to a full service upgrade. Use it to find what fits your situation, then call and we will walk through the details with you.
| Electrical Service | Scope of Work | Common Situations | Things to Know |
|---|---|---|---|
| Outlet & Switch Installation |
| Kitchens, bathrooms, bedrooms, home offices, and rental units needing updated or additional outlets | GFCI protection is required by code anywhere water is nearby, and we confirm the right outlet type for each location before the visit. |
| EV Charger Installation |
| Homeowners adding a home EV charger in a garage or at an exterior location | If the panel does not have the headroom for a 40- to 50-amp circuit, a service upgrade is part of the same project and we scope both on the call. |
| Electrical Panel & Service Upgrades |
| Homes with aging panels, added load from appliances or EV chargers, or frequent breaker trips | Hollins's housing stock spans many decades, and a panel sized for a 1960s home often cannot carry a modern load without an upgrade. |
Call (540) 324-2664 and we will walk through your situation, scope the job, and give you a price before anything gets scheduled.
(540) 324-2664